Here are several tips about how to maintain your hot tub and also a recommandation if you live in Colorado. Replace your insulated doors with screened louvered doors, which permit the shell and water to cool more quickly and also vents the heat from the running motors. (We do not advise leaving the doors open or off. The inside of a spa is not a safe place for children or pets, and you don’t want insects and rodents to get in).
Your daily maintenance tasks are all about ensuring good water quality. In a hot tub that means checking two things: PH and sanitizer levels. This is easy stuff, and can generally be accomplished by dipping a single, color-coded test strip into the water to check that everything is as it should be. If you’re diligent about maintaining your tub, most days this won’t mean doing anything more than walking out to your tub, dipping the test stick in the water, and heading back inside. If your PH or sanitizer levels need adjusting, however, you’ll need take an extra few minutes to dump the proper additive into your water to get things back their proper levels. Doing so will prevent a host of problems, including scaling, mineral buildup, corrosion, skin irritation, and cloudy and stinky water.
Tips for purchasing a hot tub : Built to last, molded resin spas are built with the shell and cabinet as one piece. This creates a strong, durable spa with an eye catching, easy care finish. Resin spas share some features of acrylic, like loungers and lighting packages, with fewer jets and a lower price. Not all resin hot tubs are created equally. Some spa brands cut corners by heating the spa with the pump, rather than a dedicated heater. These spas do not heat as fast as spas with efficient heating element systems like LifeCast brand. Their temperature is difficult to regulate in very hot or cold weather.
One of the most important things you can do to increase the longevity of your spa cover is to remove it at least twice per week. Use a spa cover lifter to completely remove it, or if you don’t have a spa cover lift, gently place it off the spa. Give your cover a few hours to breathe and shake off some of the constant heat and moisture. This is also a good time to add chemicals or shock the spa if you aren’t using it at the time.
If your spa filter has a pressure gauge attached to it, the cartridge needs cleaned when the pressure rises 8-10 PSI higher than the freshly cleaned pressure reading, or when flow is noticeably reduced. If you have no gauge on your filter, you should clean the filter on a regular schedule. Spa and Hot Tub CareI clean my own filter cartridge every 4-8 weeks, depending on how often I use the spa. If my hot tub is being used a few times per week, I’ll clean the filter every four weeks, or monthly. Read extra info at Hot tubs advices.