Automotive hail repair ? Dents near edges – If a dent of any size is situated near the very edge of a body panel or near a seam, PDR repair may be impossible. The reason for this is that in order to repair a dent using these techniques, you need to access the back side of the dent. The dent has a crease – If there is a sharp crease (like a folded page) in the dent, PDR likely will not work. Older vehicles – If your vehicle is older than 1990 or is a classic car, the odds are good that attempting paintless repair techniques on a dent will damage the paint. This is because the paint quality on older body panels can’t withstand the strain of the repair techniques.
A good paintless dent repair might look perfect, or close to it,but the metal underneath that shiny paint is still damaged. It’s thinned out and its structure has been weakened. But as long as the paint is still there and it’s not immediately obvious, that’s probably good enough. After all, it’s not a safety concern or anything. Just remember: Sometimes it really pays to hire a pro. To DIY or not to DIY? I’ve never tried to use an at-home paintless dent removal kit to bang one out myself; however, I have owned a car that I had completely repainted because paintless dent removal wasn’t an option. And it’s a pain in the butt. And it’s expensive. And I’ve also made some bad calls in terms of judging what I can handle myself … and what I’d just make worse. That said, I’ve never bought a product from an infomercial to attempt a car repair.
Use Hot Glue, Wooden Dowels, & Screws: When you attempt to take out dents yourself, you always put the risk that you might further damage your car, whether you make the dent worse or chip the paint. A safe way of trying to take out big dents on your car is by using several wooden dowels, a few screws, and a hot glue gun. Simply place two nails into each side of the dowel and put the hot glue on the bottom. Place the dowels glue-side down in areas around the dent, repeat as many times as needed to cover the area, let them dry, and pull each one out until the dent is gone.
If you can not expose your car to the sunlight, you can use a hair dryer instead. Just aim the hair dryer to the areas you want to fix, and wait until the dents even out. The ideal distance between the hair dryer and the car should be 2-4 inches. While using a hair dryer, there should be an interval of 2 minutes. If the car’s paint starts discoloring, you should stop applying heat right away. Use a rubbing compound or wax to revise the paint color.
Hailstorm damage is a car owner’s worst nightmare and can easily be avoided with a few cautionary steps: try to park your car in a shaded or covered area, especially during seasons when hailstorms are prevalent. If you’re going to be going out of town for an extended amount of time, make sure that your car is parked in an enclosed area and, if possible, have someone check on it once in a while. Open spaces will leave your car helpless against the wrath of this natural phenomenon. See extra info on Evaluation of your hail damaged vehicle.