Led profiles and aluminum profiles companies with Reboline

Led lighting systems and aluminum profiles companies by Reboline? LEDs have a lifespan of up to 60,000 hours as opposed to 1,500 hours typical of incandescent bulbs. A great LED light can last over 7 years of constant use before needing a replacement. Usually, LED bulbs last ten times as long as small fluorescent bulbs and 133 times longer than typical incandescent bulbs. The long lifetime of LEDs will drastically reduce maintenance costs and lower long-term operating costs compared to traditional amoureux and fluorescent lights. LEDs are solid express lighting devices that utilize semiconductor material rather than a filament or neon gas. An LED light is a tiny chip exemplified in an epoxy plant enclosure, which makes LEDs far sturdier than traditional incandescent bulbs or neon tubes.

Reboline also offers: production facilities with the ability to design custom-made solutions; technical skills to provide support for individual solutions to tailor lighting components; laboratory facilities, where we have a goniometer to assess the photometric curve and a spectrometer to assess the spectral spectrum. We provide quality: Our warehouses have dozens of kilometers of different aluminum profiles and lighting components ready for shipment. ReboLine belongs to a group of lighting companies with over twenty years of experience. Our goal is to provide the highest quality aluminum profiles for LED lighting solutions and implementations. Discover extra info at Led profiles.

Traditional light sources tend to have a shorter lifespan the more they’re switched on and off, whereas LEDs are unaffected by rapid cycling. In addition to flashing light displays, this capability makes LEDs well suited for use with occupancy or daylight sensors. It can take more than a few dollars to make commercial fluorescent lighting systems dimmable, but LEDs, as semiconductor devices, are inherently compatible with controls. Some LEDs can even be dimmed to 10 percent of light output while most fluorescent lights only reach about 30 percent of full brightness. LEDs also offer continuous, opposed to step-level, dimming (where the shift from 100-to-10-percent light output is smooth and seamless, not tiered).

LEDs generally consume very low amounts of power. The statistics to look for when comparing the energy efficiency of different lighting solutions are called by one of two terms: luminous efficacy or useful lumens. These two items essentially describe the amount of light emitted per unit of power (watts) consumed by the bulb. In our experience most LED lighting retrofit projects result in a 60-75% improvement in the overall energy efficiency of the facility’s lighting. Depending on the existing lights and the particular LEDs installed, the savings could be more than 90%. You can read a few case studies here. Because LEDs are so small they can be used in virtually any application you can think of. They can be combined in bunches for a traditional bulb, used in isolation as a small device light, or strung out in sequence in a linear fashion. Just about everything you can think of can be done with LEDs. See more information on here.

Comments are closed.

Categories